修复你的物品 社区 商店

iRobot Roomba Essential Robot Bumper Replacement

简介

If your iRobot Roomba Essential Robot is bumping into objects or missing areas while cleaning, the bumper may need to be replaced and the sensors may need to be cleaned. This guide will walk you through removing the bumper and cleaning the sensors, a straightforward process you can do at home using basic tools. Over time, dust and debris can accumulate on the sensors, causing navigation issues and reducing cleaning efficiency. Replacing the bumper and cleaning the sensors will help restore your robot vacuum's ability to navigate accurately.

Symptoms:

  • Robot frequently bumps into objects
  • Missed areas during cleaning

For more information on diagnosing sensor or bumper issues, visit our troubleshooting page.

你所需要的

  1. iRobot Roomba Essential Robot Bumper Replacement, Bumper: 步骤 1 中的图像 1，3 iRobot Roomba Essential Robot Bumper Replacement, Bumper: 步骤 1 中的图像 2，3 iRobot Roomba Essential Robot Bumper Replacement, Bumper: 步骤 1 中的图像 3，3

    • Remove the six screws from the thin edge on the backside of the Roomba using a Phillips #00 screwdriver.

    编辑

  3. iRobot Roomba Essential Robot Bumper Replacement: 步骤 2 中的图像 1，1

    • Separate the bumper from the Roomba.

    编辑

  4. iRobot Roomba Essential Robot Bumper Replacement: 步骤 3 中的图像 1，2 iRobot Roomba Essential Robot Bumper Replacement: 步骤 3 中的图像 2，2

    • Place your fingers against the white tabs on the side of the Roomba and remove the bumper.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

hannah neuendorf

于09/04/24注册

422 声望

创作了3篇指南

徽章: 5

+ 2更多徽章

团队

Utah Tech University, Team 1-7, Crenshaw Fall 2024 Utah Tech University, Team 1-7, Crenshaw Fall 2024 的会员

UTAHTECH-CRENSHAW-F24S1G7

3 名成员

创作了4篇指南

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 13

过去 30 天： 25

总计 279