跳转到主内容

简介

The rear wheel assembly is what propels the roomba. If they become damaged the roomba will begin to move irregularly or not at all.

配件

没有特定配件。

  1. Flip over the device and remove the (2)11.5mm screws using the Phillips #1 screwdriver.
    • Flip over the device and remove the (2)11.5mm screws using the Phillips #1 screwdriver.

  2. Unscrew the back plate using a Phillips#1 head screwdriver. Carefully lift the panel up once the screws are removed.
    • Unscrew the back plate using a Phillips#1 head screwdriver.

    • Carefully lift the panel up once the screws are removed.

  3. With both hands, grab the 2 black tabs on each ends of the battery. Pull the tabs upwards to remove the battery.
    • With both hands, grab the 2 black tabs on each ends of the battery.

    • Pull the tabs upwards to remove the battery.

  4. Loosen the screw on the side brush. Lift the side brush from the device.
    • Loosen the screw on the side brush.

    • Lift the side brush from the device.

  5. Unscrew the (2) 11.5mm screws using the Phillips #1 screwdriver. Carefully remove the plate by lifting it off of the device.
    • Unscrew the (2) 11.5mm screws using the Phillips #1 screwdriver.

    • Carefully remove the plate by lifting it off of the device.

  6. Removing the brush module may ease the removal of the wheel module Locate the (3) 15.8mm gold Phillips #1 screws and unscrew them.
    • Removing the brush module may ease the removal of the wheel module

    • Locate the (3) 15.8mm gold Phillips #1 screws and unscrew them.

    • Lift the wheel module removing it from the vacuum.

    • Remove the other wheel by repeating these steps.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Ernesto Rodriguez Romero

于2017年09月27日注册

743 信誉积分

创作了4篇指南

团队

USF Tampa, Team S14-G2, Boczar Fall 2017 USF Tampa, Team S14-G2, Boczar Fall 2017 的会员

USFT-BOCZAR-F17S14G2

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 5

过去的30天: 44

总计 1,251