修复你的物品 社区 商店

iRobot Roomba 891 Extractor Assembly Replacement

简介

This easy guide show you the steps to remove and replace the extractor assembly on your roomba.

你所需要的

  1. iRobot Roomba 891 Extractor Assembly Replacement, Battery: 步骤 1 中的图像 1，2 iRobot Roomba 891 Extractor Assembly Replacement, Battery: 步骤 1 中的图像 2，2

    • Start by flipping your Roomba onto its back on a flat surface.

    • Be sure not to close the side brush bristles in the battery door during reassembly as shown by the handy warning in the second photo.

    编辑

  2. iRobot Roomba 891 Extractor Assembly Replacement: 步骤 2 中的图像 1，1

    • Unscrew both the 11mm Phillips #2 screws from the battery cover and remove cover from the Roomba.

    • These captive screws are not intended to be removed from the cover.

    编辑

  3. iRobot Roomba 891 Extractor Assembly Replacement: 步骤 3 中的图像 1，3 iRobot Roomba 891 Extractor Assembly Replacement: 步骤 3 中的图像 2，3 iRobot Roomba 891 Extractor Assembly Replacement: 步骤 3 中的图像 3，3

    • Grasp the tabs on either side of the battery.

    • Remove the battery by pulling up on the tabs.

    • While you're here, check the battery contacts for corrosion or debris.

    编辑

  4. iRobot Roomba 891 Extractor Assembly Replacement, Side Brush: 步骤 4 中的图像 1，2 iRobot Roomba 891 Extractor Assembly Replacement, Side Brush: 步骤 4 中的图像 2，2

    • Remove the 7.5mm flat head #4 screw from center of the side brush.

    编辑

  6. iRobot Roomba 891 Extractor Assembly Replacement: 步骤 5 中的图像 1，1

    • Gently pull the side brush off of the motor hub.

    编辑

  7. iRobot Roomba 891 Extractor Assembly Replacement, Extractor Assembly: 步骤 6 中的图像 1，1

    • Remove the dustbin assembly from the Roomba.

    编辑

  8. iRobot Roomba 891 Extractor Assembly Replacement: 步骤 7 中的图像 1，3 iRobot Roomba 891 Extractor Assembly Replacement: 步骤 7 中的图像 2，3 iRobot Roomba 891 Extractor Assembly Replacement: 步骤 7 中的图像 3，3

    • Unscrew the 2 phillips #2 11mm screws from roomba.

    • These captive screws will remain in the bottom cover after being loosened.

    编辑

  9. iRobot Roomba 891 Extractor Assembly Replacement: 步骤 8 中的图像 1，2 iRobot Roomba 891 Extractor Assembly Replacement: 步骤 8 中的图像 2，2

    • Lift the yellow tabs and lift the red cover from the extractor assembly.

    编辑

  10. iRobot Roomba 891 Extractor Assembly Replacement: 步骤 9 中的图像 1，1

    • Remove the rollers from the assembly by lifting it out from right side.

    编辑

  11. iRobot Roomba 891 Extractor Assembly Replacement: 步骤 10 中的图像 1，2 iRobot Roomba 891 Extractor Assembly Replacement: 步骤 10 中的图像 2，2

    • Close the cover and remove the four 11mm Phillips #00 screws from the assembly.

    编辑

  12. iRobot Roomba 891 Extractor Assembly Replacement: 步骤 11 中的图像 1，1

    • Grasp the center of the assembly and remove from the roomba.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 5

总计 600