修复你的物品 社区 商店

iRobot Roomba 890 Charging Contacts Replacement

你所需要的

  1. iRobot Roomba 890 Charging Contacts Replacement, Charging Contacts: 步骤 1 中的图像 1，2 iRobot Roomba 890 Charging Contacts Replacement, Charging Contacts: 步骤 1 中的图像 2，2

    • Use a Phillips #2 screwdriver to remove the 7.7 mm screw.

    • Remove the yellow brush head.

    编辑

  2. iRobot Roomba 890 Charging Contacts Replacement: 步骤 2 中的图像 1，1

    • Place the Roomba facedown, with its bottom facing you.

    • Use a Phillips #2 screwdriver to remove the two 11 mm screws.

    编辑

  3. iRobot Roomba 890 Charging Contacts Replacement: 步骤 3 中的图像 1，1

    • Remove the battery plate.

    • Remove the battery by pulling directly up on the grey pull tabs.

    编辑

  4. iRobot Roomba 890 Charging Contacts Replacement: 步骤 4 中的图像 1，2 iRobot Roomba 890 Charging Contacts Replacement: 步骤 4 中的图像 2，2

    • Use a Phillips #2 screwdriver to remove the four 11 mm screws.

    • Remove the bottom plate of the Roomba.

    编辑

  6. iRobot Roomba 890 Charging Contacts Replacement: 步骤 5 中的图像 1，2 iRobot Roomba 890 Charging Contacts Replacement: 步骤 5 中的图像 2，2

    • Turn Roomba face up.

    • Remove the dustbin by pressing the release button on the top side of the Roomba and pulling it straight out.

    编辑

  7. iRobot Roomba 890 Charging Contacts Replacement: 步骤 6 中的图像 1，2 iRobot Roomba 890 Charging Contacts Replacement: 步骤 6 中的图像 2，2

    • Using the opening tool, remove retaining band.

    • Use the removal tool to remove the face plate as well.

    • Pry up slowly around the edges to prevent damage to the plastic components.

    编辑

  8. iRobot Roomba 890 Charging Contacts Replacement: 步骤 7 中的图像 1，3 iRobot Roomba 890 Charging Contacts Replacement: 步骤 7 中的图像 2，3 iRobot Roomba 890 Charging Contacts Replacement: 步骤 7 中的图像 3，3

    • Use a Phillips #1 screwdriver to remove the two 9.5 mm handle screws.

    • Use a Phillips #1 screwdriver to remove the fourteen 9.5 mm top plate screws.

    • Lift the top plate off.

    编辑

  9. iRobot Roomba 890 Charging Contacts Replacement: 步骤 8 中的图像 1，2 iRobot Roomba 890 Charging Contacts Replacement: 步骤 8 中的图像 2，2

    • Locate the charging contact wire connection to the motherboard.

    • Release the connector.

    • Pull gently on the white plug, not the wires themselves.

    编辑

  10. iRobot Roomba 890 Charging Contacts Replacement: 步骤 9 中的图像 1，1

    • Use a Phillips #1 screwdriver to remove the four 9.3 mm bumper sensor screws.

    编辑

  11. iRobot Roomba 890 Charging Contacts Replacement: 步骤 10 中的图像 1，1

    • Use a Phillips #1 screwdriver to remove the two 9.3 mm screws holding the charging contact backings in place.

    • Remove the charging contact backings.

    编辑

  12. iRobot Roomba 890 Charging Contacts Replacement: 步骤 11 中的图像 1，1

    • Use the iFixit opening tool to gently pry down on the charging contact, on the side closest to the cliff sensor.

    • With the charging contact dislodged, pull it through the Roomba housing.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与1其他贡献者

Devin Steiblin

于03/28/22注册

442 声望

创作了2篇指南

徽章: 6

+ 3更多徽章

团队

UMass Dartmouth, Team 1-3, Petersen Spring 2022 UMass Dartmouth, Team 1-3, Petersen Spring 2022 的会员

UMASSD-PETERSEN-S22S1G3

3 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 28

过去 30 天： 95

总计 3,709