修复你的物品 社区 商店

iRobot Roomba 770 Main Wheels Replacement

简介

These wheels control the main movement of the device. Since it is one of the main parts used, the tires of the wheel may get worn, debris may get caught inside, or the wheel may just need to be replaced from overuse.

你所需要的

  1. iRobot Roomba 770 Main Wheels Replacement, Battery: 步骤 1 中的图像 1，2 iRobot Roomba 770 Main Wheels Replacement, Battery: 步骤 1 中的图像 2，2

    • Flip the Roomba over so that the wheels are facing up and the dust tray is closest to you.

    • Using the J1 Phillips screwdriver, locate and unscrew the two 11mm phillips screws above the brushes on the battery panel.

    • Remove the plastic plate from the battery box.

    编辑

  2. iRobot Roomba 770 Main Wheels Replacement: 步骤 2 中的图像 1，2 iRobot Roomba 770 Main Wheels Replacement: 步骤 2 中的图像 2，2

    • Locate the 2 green tabs on the left and right of the big yellow battery.

    • Grab the tabs with your hands and lift straight upward.

    编辑

  3. iRobot Roomba 770 Main Wheels Replacement, Side Brush Motor: 步骤 3 中的图像 1，1

    • Using the J1 Philips Screwdriver, remove the 15.5 mm screw located in the center of the side brush.

    • Remove the brush by pulling upwards.

    • Do not lean directly over the brush when attempting to remove. Removing the brush requires a firm pull and may release suddenly.

    编辑

  5. iRobot Roomba 770 Main Wheels Replacement: 步骤 4 中的图像 1，2 iRobot Roomba 770 Main Wheels Replacement: 步骤 4 中的图像 2，2

    • Using the J1 Philips Screwdriver, remove the two 15.5 mm screws located on the bottom of the plate covering the bottom of the roomba.

    • Lift upwards to remove the bottom plate.

    编辑

  6. iRobot Roomba 770 Main Wheels Replacement: 步骤 5 中的图像 1，2 iRobot Roomba 770 Main Wheels Replacement: 步骤 5 中的图像 2，2

    • Using the J1 Philips Screwdriver, remove the two gold 15.5 mm screws located on the blue plastic module the side brush had previously been attached too.

    • Lift the blue module upwards. The module contains the motor for the side brush.

    编辑

  7. iRobot Roomba 770 Main Wheels Replacement, Main Wheels: 步骤 6 中的图像 1，2 iRobot Roomba 770 Main Wheels Replacement, Main Wheels: 步骤 6 中的图像 2，2

    • Locate the three 15.5 mm screws surrounding each wheel. Use a J1 Philips screw driver to remove these.

    • The screw towards the center for each wheel may be hard to locate and may seem inaccessible. The head of your screw is long enough to reach it.

    • Use your J1 Philips screwdriver to remove these screws.

    编辑

  8. iRobot Roomba 770 Main Wheels Replacement: 步骤 7 中的图像 1，2 iRobot Roomba 770 Main Wheels Replacement: 步骤 7 中的图像 2，2

    • Pull up on the wheels to remove them from the device.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与1其他贡献者

Angelique Bonilla

于10/06/16注册

251 声望

撰写一个指南

徽章: 6

+ 3更多徽章

团队

Cal Poly, Team 15-3, Livingston Fall 2016 Cal Poly, Team 15-3, Livingston Fall 2016 的会员

CPSU-LIVINGSTON-F16S15G3

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 7

总计 2,908