修复你的物品 社区 商店

iRobot Roomba 770 Brush Replacement

简介

This guide can be used to clean and/or replace either of the two brushes located on the bottom of the iRobot Roomba 770. It is recommended that you attempt to clean the brushes before replacing, unless the brushes are damaged or broken.

  1. iRobot Roomba 770 Brush Replacement, Brush: 步骤 1 中的图像 1，1

    • Orient the roomba so it is upside down and the dust tray is closest to you.

    编辑

  2. iRobot Roomba 770 Brush Replacement: 步骤 2 中的图像 1，2 iRobot Roomba 770 Brush Replacement: 步骤 2 中的图像 2，2

    • Locate the two yellow tabs on the screen that covers the brushes.

    • Push inwards on the yellow tabs while simultaneously pulling upwards on the attached grey cage.

    编辑

  4. iRobot Roomba 770 Brush Replacement: 步骤 3 中的图像 1，3 iRobot Roomba 770 Brush Replacement: 步骤 3 中的图像 2，3 iRobot Roomba 770 Brush Replacement: 步骤 3 中的图像 3，3

    • Grab the right side of the larger brush that is located near the yellow cap. Pull upwards and to the right to remove the brush.

    • Repeat the same steps with the smaller brush.

    编辑

  5. iRobot Roomba 770 Brush Replacement: 步骤 4 中的图像 1，2 iRobot Roomba 770 Brush Replacement: 步骤 4 中的图像 2，2

    • Orient the brush so the yellow tab is on the right hand side.

    • Pull the yellow tab to the right to remove.

    • Remove any debris, paying attention to the ends as well as the brush itself.

    • Replace any damaged brushes.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Andrew Horvath

于10/05/16注册

444 声望

创作了3篇指南

徽章: 12

+ 9更多徽章

团队

Cal Poly, Team 15-3, Livingston Fall 2016 Cal Poly, Team 15-3, Livingston Fall 2016 的会员

CPSU-LIVINGSTON-F16S15G3

3 名成员

创作了5篇指南

一条评论

My roomba starts and moves a foot or so and then stops. I have cleaned it entirely, the battery is fine and the wheels are clean. Anyone have a suggestion

Mary Ann Dyer - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 12

总计 2,274