修复你的物品 社区 商店

iRobot Roomba 690 Spinning Brush Replacement

简介

The spinning brush on the iRobot Roomba 690 is used to help sweep debris towards the roller brushes. Over time, it may need to be replaced or cleaned. This guide will explain how to replace the spinning brush. Removing the spinning brush is required when accessing components of the Roomba concealed inside the protective bottom cover, and as such performing these steps will be required to complete other guides.

你所需要的

  1. iRobot Roomba 690 Spinning Brush Replacement, Spinning Brush: 步骤 1 中的图像 1，1

    • Place the Roomba upside down so that the wheels and brushes are facing upward.

    编辑

  3. iRobot Roomba 690 Spinning Brush Replacement: 步骤 2 中的图像 1，3 iRobot Roomba 690 Spinning Brush Replacement: 步骤 2 中的图像 2，3 iRobot Roomba 690 Spinning Brush Replacement: 步骤 2 中的图像 3，3

    • Loosen the captive screw in the spinning brush using a Phillips #0 screwdriver.

    • Remove the spinning brush from the vacuum.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

John Galvin

于03/23/22注册

584 声望

创作了5篇指南

徽章: 6

+ 3更多徽章

团队

UMass Dartmouth, Team 1-1, Botvin Spring 2022 UMass Dartmouth, Team 1-1, Botvin Spring 2022 的会员

UMASSD-BOTVIN-S22S1G1

2 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 13

总计 182