跳转到主内容

iRobot Roomba 630 Side Brush Motor Replacement

你所需要的

  1. iRobot Roomba 630 Side Brush Motor Replacement, Side Brush Motor: 步骤 1 中的图像 1,2 iRobot Roomba 630 Side Brush Motor Replacement, Side Brush Motor: 步骤 1 中的图像 2,2
    • Flip the Roomba over so that the wheels are facing upwards.

    • Unscrew the 6 mm screw from the yellow side brush using a Phillips #2 screwdriver.

  2. iRobot Roomba 630 Side Brush Motor Replacement: 步骤 2 中的图像 1,2 iRobot Roomba 630 Side Brush Motor Replacement: 步骤 2 中的图像 2,2
    • Remove the four 10.1 mm screws from the back cover using a Phillips #2 screwdriver.

    • Lift the back cover off to access the gear box.

  3. iRobot Roomba 630 Side Brush Motor Replacement: 步骤 3 中的图像 1,3 iRobot Roomba 630 Side Brush Motor Replacement: 步骤 3 中的图像 2,3 iRobot Roomba 630 Side Brush Motor Replacement: 步骤 3 中的图像 3,3
    • Remove the three outer 15 mm screws that hold down the gearbox using a Phillips #2 screwdriver.

    • Remove the middle 15 mm screw to release the gearbox using a tri-point Y0 screwdriver.

    • Lift the blue side brush gear box out.

  4. iRobot Roomba 630 Side Brush Motor Replacement: 步骤 4 中的图像 1,2 iRobot Roomba 630 Side Brush Motor Replacement: 步骤 4 中的图像 2,2
    • Pry the top of the gear box off.

    • Check for debris in the gear box and clean it out if needed.

  5. iRobot Roomba 630 Side Brush Motor Replacement: 步骤 5 中的图像 1,3 iRobot Roomba 630 Side Brush Motor Replacement: 步骤 5 中的图像 2,3 iRobot Roomba 630 Side Brush Motor Replacement: 步骤 5 中的图像 3,3
    • Remove the screws holding the motor in place using a Phillips #2 screwdriver.

    • Pull the old motor out.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

Jabari Baptiste

于10/03/17注册

485 声望

创作了3篇指南

团队

USF Tampa, Team S5-G3, Walkup Fall 2017 USF Tampa, Team S5-G3, Walkup Fall 2017 的会员

USFT-WALKUP-F17S5G3

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 6

过去 30 天: 39

总计 1,900