简介
This guide is useful for replacing a dead battery or a battery that cannot be recharged through the dock for some reason. This guide is pretty simple can be done in 3 steps, and won't break anything important
你所需要的
-
-
Flip the Roomba upside down. Using the Phillips #0 screwdriver, carefully remove the 5 mm screw holding the brush in place.
-
-
-
-
Unscrew the four 10mm screws on the underside of the Roomba using a Phillips #1 screwdriver.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
5等其他人完成本指南。
团队
USF Tampa, Team S10-G5, Thompson Fall 2017 USF Tampa, Team S10-G5, Thompson Fall 2017 的会员
USFT-THOMPSON-F17S10G5
3 名成员
创作了5篇指南
2条评论
Pls, can i charge the roomba directly, because the base is not working??
Yes I think so, mine can
