跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Use this guide to replace the Roomba's battery if the device shows signs of a faulty or damaged battery. Signs of a bad battery include an inability to hold charge or a short run time while cleaning. Battery damage can be caused by overuse, or exposure to heat and water.

  1. Flip the Roomba upside down.
    • Flip the Roomba upside down.

    • Unscrew the single 5 mm screw on the yellow side sweeper using the Phillips JIS #1 driver.

  2. Lift the yellow side sweeper, removing it from the device.
    • Lift the yellow side sweeper, removing it from the device.

  3. Using the Phillips JIS #1 driver, remove the four 10 mm screws that hold the back panel in place.
    • Using the Phillips JIS #1 driver, remove the four 10 mm screws that hold the back panel in place.

  4. Lift up the back panel to remove it from the device.
    • Lift up the back panel to remove it from the device.

  5. Lift up the yellow battery by pulling up the green tabs on its side. Handle the battery with care.
    • Lift up the yellow battery by pulling up the green tabs on its side.

    • Handle the battery with care.

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

Mairead Blaes

于2015年10月01日注册

705 信誉积分

创作了4篇指南

团队

Cal Poly, Team 1-22, Maness Fall 2015 Cal Poly, Team 1-22, Maness Fall 2015 的会员

CPSU-MANESS-F15S1G22

4 名成员

创作了14篇指南

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 18

过去的30天: 59

总计 2,788