修复你的物品 维修的权力 商店

本指南有更多最近的更新。切换到最新的未经核实的版本。

iRobot Roomba 551 Side Wheel Replacement

撰写者： Deborah Newberry (和另外3个贡献者)
  • 评论： 1
  • 收藏 1
  • 完成 3

难度

简单

步骤

8

所需时间

5 - 15 分钟

节

3

标志

0

简介

This is an easy way to quickly replace the side wheel of your Roomba. It is slightly more work than the front wheel, which can be found here, but is a straightforward process.

  1. Place your Roomba upside-down on a hard surface.

    • Place your Roomba upside-down on a hard surface.

    翻译

  2. While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    翻译

  3. Gently pull upwards on the brush to remove it.

    • Gently pull upwards on the brush to remove it.

    翻译

  5. Rotate the Roomba upside-down so the bottom is facing towards you.

    • Rotate the Roomba upside-down so the bottom is facing towards you.

    翻译

  6. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

    翻译

  7. Carefully lift the bottom plate.

    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

    翻译

  8. Find the blue wheel at the bottom of the Roomba, and unscrew the three captive screws holding it in place using a Phillips #1 screwdriver. Find the blue wheel at the bottom of the Roomba, and unscrew the three captive screws holding it in place using a Phillips #1 screwdriver. Find the blue wheel at the bottom of the Roomba, and unscrew the three captive screws holding it in place using a Phillips #1 screwdriver.

    • Find the blue wheel at the bottom of the Roomba, and unscrew the three captive screws holding it in place using a Phillips #1 screwdriver.

    翻译

  9. Gently lift the wheel to remove. Gently lift the wheel to remove.

    • Gently lift the wheel to remove.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

作者

与3其他贡献者

Deborah Newberry

于2014年01月23日注册

599 信誉积分

创作了4篇指南

徽章: 13

+ 10更多徽章

团队

Cal Poly, Team 13-14, Regan Winter 2014 Cal Poly, Team 13-14, Regan Winter 2014 的会员

CPSU-REGAN-W14S13G14

4 名成员

创作了19篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 1

过去的7天： 1

过去的30天： 3

总计 1,040