简介

This guide explains how to quickly remove the side brush from your Roomba in order to either replace it or to further disassemble the device.

配件

无需配件。

  1. Place your Roomba upside-down on a hard surface.
    • Place your Roomba upside-down on a hard surface.

    If all you need off is the faceplate, skip all of the screwdriver-based steps, and just remove the dirt bin(step 7) and start from step 11 at the rear.

    David Forrest - 回复

  2. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.
    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    添加评论

    • Gently pull upwards on the brush to remove it.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Aaron Jacobs

于2014年01月31日注册

525 信誉积分

创作了4篇指南

团队

Cal Poly, Team 13-14, Regan Winter 2014 Cal Poly, Team 13-14, Regan Winter 2014 的会员

CPSU-REGAN-W14S13G14

4 名成员

创作了13篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 248