菜单

你的设置

我的工作台

快速访问设备的指南，配件和论坛
我的购物车

购物车是空的

浏览我们的商店

iRobot Roomba 551 Side Brush Motor Replacement

撰写者： Aaron Jacobs (和另外2个贡献者)
  • 评论： 1
  • 收藏 0

难度

简单

步骤

8

所需时间

5 - 15 分钟

节

3

标志

0

简介

This guide explains how to remove the side brush motor from your Roomba.

工具

购买这些工具

配件

没有特定配件。

  1. Place your Roomba upside-down on a hard surface.

    • Place your Roomba upside-down on a hard surface.

    编辑

  2. While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    编辑

  3. Gently pull upwards on the brush to remove it.

    • Gently pull upwards on the brush to remove it.

    编辑

  4. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now

  5. Rotate the Roomba upside-down so the bottom is facing towards you.

    • Rotate the Roomba upside-down so the bottom is facing towards you.

    编辑

  6. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place. Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

    编辑

  7. Carefully lift the bottom plate.

    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

    编辑

  8. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly. Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly.

    • Use a Phillips #1 screwdriver to remove the two captive mounting screws on the side wheel motor assembly.

    编辑

  9. Gently pull on motor assembly to remove.

    • Gently pull on motor assembly to remove.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与2其他贡献者

Aaron Jacobs

于2014年01月31日注册

534 信誉积分

创作了4篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 13-14, Regan Winter 2014 Cal Poly, Team 13-14, Regan Winter 2014 的会员

CPSU-REGAN-W14S13G14

4 名成员

创作了13篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 1

总计 718