修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

iRobot Roomba 551 Main Brush Motor Replacement

简介

This guide explains how to remove the main brush motor from your Roomba.

你所需要的

  1. iRobot Roomba 551 Main Brush Motor Replacement, Side Brush: 步骤 1 中的图像 1，1

    • Place your Roomba upside-down on a hard surface.

    翻译

  2. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 2 中的图像 1，1

    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

    翻译

  3. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 3 中的图像 1，1

    • Gently pull upwards on the brush to remove it.

    翻译

  4. iRobot Roomba 551 Main Brush Motor Replacement, Bottom Plate: 步骤 4 中的图像 1，1

    • Rotate the Roomba upside-down so the bottom is facing towards you.

    翻译

  5. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 5 中的图像 1，2 iRobot Roomba 551 Main Brush Motor Replacement: 步骤 5 中的图像 2，2

    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

    翻译

  7. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 6 中的图像 1，1

    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

    翻译

  8. iRobot Roomba 551 Main Brush Motor Replacement, iRobot Roomba 551 Dirt Bin Replacement: 步骤 7 中的图像 1，1

    • Push on the dirt bin release button, and pull gently.

    翻译

  9. iRobot Roomba 551 Main Brush Motor Replacement, Brush Case: 步骤 8 中的图像 1，1

    • Use a Phillips #1 screwdriver to loosen the 4 captive screws around the case .

    翻译

  10. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 9 中的图像 1，1

    • Grab the brush case and pull upwards to remove.

    翻译

  11. iRobot Roomba 551 Main Brush Motor Replacement, Main Brush Motor: 步骤 10 中的图像 1，3 iRobot Roomba 551 Main Brush Motor Replacement, Main Brush Motor: 步骤 10 中的图像 2，3 iRobot Roomba 551 Main Brush Motor Replacement, Main Brush Motor: 步骤 10 中的图像 3，3

    • Use a Phillips #1 screwdriver to remove the 9.5mm screws from the side of the brush case, and pull to detach.

    • Repeat for the opposite side of the brush case.

    翻译

  12. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 11 中的图像 1，3 iRobot Roomba 551 Main Brush Motor Replacement: 步骤 11 中的图像 2，3 iRobot Roomba 551 Main Brush Motor Replacement: 步骤 11 中的图像 3，3

    • Use a Phillips #1 screwdriver to remove the three 5.0mm screws from the back of the brush case.

    • Pull off the back of the brush case.

    翻译

  13. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 12 中的图像 1，2 iRobot Roomba 551 Main Brush Motor Replacement: 步骤 12 中的图像 2，2

    • Use a Phillips #1 screwdriver to remove the two 1.5mm screws securing the chip in place.

    • Remove the chip from its housing in the blue brush case.

    翻译

  14. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 13 中的图像 1，2 iRobot Roomba 551 Main Brush Motor Replacement: 步骤 13 中的图像 2，2

    • Use a Phillips #1 screwdriver to remove the two 5.5mm screws securing the motor in place.

    翻译

  15. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 14 中的图像 1，2 iRobot Roomba 551 Main Brush Motor Replacement: 步骤 14 中的图像 2，2

    • Use a Phillips #1 screwdriver to remove the two 4.5mm screws on the top and bottom of the metal plate.

    • Pull out the motor and metal covering.

    翻译

  16. iRobot Roomba 551 Main Brush Motor Replacement: 步骤 15 中的图像 1，3 iRobot Roomba 551 Main Brush Motor Replacement: 步骤 15 中的图像 2，3 iRobot Roomba 551 Main Brush Motor Replacement: 步骤 15 中的图像 3，3

    • Use a Phillips #1 screwdriver to remove the two 3.5mm screws on the corners of the circuit board.

    • Gently pull out the circuit board.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

John McTigue

于01/31/14注册

331 声望

创作了3篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 13-14, Regan Winter 2014 Cal Poly, Team 13-14, Regan Winter 2014 的会员

CPSU-REGAN-W14S13G14

4 名成员

创作了19篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 8

总计 3,744