简介

This is an easy guide. It should only take a few minutes to complete and it doesn't require any tools.

工具

无需工具。

配件

无需配件。

  1. Lay the Roomba upside down on a flat surface with the blue strip away from you.
    • Lay the Roomba upside down on a flat surface with the blue strip away from you.

    添加评论

  2. Use your index fingers to pull the yellow tabs towards you.
    • Use your index fingers to pull the yellow tabs towards you.

    • While still pulling the yellow tabs with your index fingers, tilt up the brush guard.

    • For reassembly, make sure to push in the brush guard until it clicks into place.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Pull back the brush guard to unhook it from the latches.

    • Remove the brush guard by lifting it up and out of the Roomba.

    • This picture has a change in orientation to illustrate the latches. Continue disassembling the Roomba with the blue strip away from you.

    添加评论

    • Set the brush guard aside.

    • The main brush is the bristly one that is closest to the blue strip.

    添加评论

    • Remove the main brush by grabbing it and pulling it up and out of the Roomba.

    • For reassembly, orient the Roomba with the battery closest to you:

      • First, insert the black end of the main brush into the black square opening on the right side.

      • Second, lay the main brush back into place.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Samantha Barrett

于2014年01月13日注册

501 信誉积分

创作了5篇指南

团队

Cal Poly, Team 17-5, Forte Winter 2014 Cal Poly, Team 17-5, Forte Winter 2014 的会员

CPSU-FORTE-W14S17G5

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 2

总计 400