简介

This is an easy guide. It should only take a few minutes to complete. The only tool required is Phillips #1 Screwdriver.

配件

无需配件。

  1. Lay the Roomba upside down on a flat surface.
    • Lay the Roomba upside down on a flat surface.

    • The edge brush is located near the battery pack.

    添加评论

  2. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
  3. Using the Phillips #1 Screwdriver, unscrew the 7.2 mm Phillips #1 screw while holding the edge brush in place.
    • Using the Phillips #1 Screwdriver, unscrew the 7.2 mm Phillips #1 screw while holding the edge brush in place.

    添加评论

    • Grab the edge brush and lift it up to remove.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Samantha Barrett

于2014年01月13日注册

501 信誉积分

创作了5篇指南

团队

Cal Poly, Team 17-5, Forte Winter 2014 Cal Poly, Team 17-5, Forte Winter 2014 的会员

CPSU-FORTE-W14S17G5

5 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 323