跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

If the wheels on your iRobot Braava Jet 240 need to be replaced, follow this guide.

The wheels of the iRobot Braava Jet 240 are connected to the motor assembly and allow the robot to move around the room to clean. If there is debris caught in the wheels, removing them to clean out debris will be useful. Additionally, if the tire tread is loose or the wheels are otherwise damaged, they should be removed and replaced.

配件

没有特定配件。

  1. Turn the device off.
    • Turn the device off.

  2. Use your fingers to gently pop out the battery. Use your fingers to gently pop out the battery.
    • Use your fingers to gently pop out the battery.

  3. Lift up the handle to reveal the eject button. Lift up the handle to reveal the eject button.
    • Lift up the handle to reveal the eject button.

  4. 任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装

    任天堂 Switch 套装

    快速恢复到游戏的状态

    购买 Switch 套装
  5. Use your finger to push the eject button forward. Use your finger to push the eject button forward. Use your finger to push the eject button forward.
    • Use your finger to push the eject button forward.

  6. Tilt the robot on its side and let the mop pad slide out.
    • Tilt the robot on its side and let the mop pad slide out.

  7. Using your thumbs, first push back the motor assembly, then push up. Using your thumbs, first push back the motor assembly, then push up.
    • Using your thumbs, first push back the motor assembly, then push up.

  8. Remove the 11.55 mm screws in the middle of both wheels using the Phillips #1 screwdriver. Remove the 11.55 mm screws in the middle of both wheels using the Phillips #1 screwdriver.
    • Remove the 11.55 mm screws in the middle of both wheels using the Phillips #1 screwdriver.

  9. Pull the wheel off from the axel, pulling from the top end first so it can slide out at an angle. It will be easier to remove the wheels if the motor assembly is tilted so that the wheel that you are removing is elevated. It will be easier to remove the wheels if the motor assembly is tilted so that the wheel that you are removing is elevated.
    • Pull the wheel off from the axel, pulling from the top end first so it can slide out at an angle.

    • It will be easier to remove the wheels if the motor assembly is tilted so that the wheel that you are removing is elevated.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Claire Franz

于2020年02月10日注册

799 信誉积分

创作了7篇指南

团队

iFixit iFixit 的会员

Community

124 名成员

创作了11,617篇指南

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 45

过去的30天: 125

总计 318