跳转到主内容

修复你的物品

维修的权力

商店

简介

The pad is a disposable attachment that wipes the surface the robot drives over. If the cleaning pad on the iRobot Braava Jet 240 has become dirty and no longer cleans, use this guide to replace it. The cleaning pad should also be removed when replacing other parts of the robot, as the pad obscures several screws used to open the robot.

  1. Lift up the handle to reveal the eject button. Lift up the handle to reveal the eject button.
    • Lift up the handle to reveal the eject button.

  2. 打开所有标签

    Mac的RAM升级套装

    购买套装

    所有选项卡都有足够的 RAM

    购买套装
  3. Use your finger to push the eject button forward. Use your finger to push the eject button forward. Use your finger to push the eject button forward.
    • Use your finger to push the eject button forward.

  4. Tilt the robot on its side and let the mop pad slide out.
    • Tilt the robot on its side and let the mop pad slide out.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Claire Franz

于2020年02月10日注册

1,346 信誉积分

创作了7篇指南

团队

iFixit iFixit 的会员

Community

130 名成员

创作了12,415篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 2

过去的30天: 11

总计 120