跳转到主内容

你所需要的

  1. iPod Touch 5th Generation Lightning Connector Assembly Replacement, Lightning Connector Assembly: 步骤 1 中的图像 1,1
    • Use the tip of a spudger to peel back a small piece of tape covering a screw on the left side of the headphone jack.

  2. iPod Touch 5th Generation Lightning Connector Assembly Replacement: 步骤 2 中的图像 1,1
    • Remove the following screws securing the headphone jack, Lightning connector, and speaker.

    • Three 2.6 mm #000 Phillips screws

    • Two 2.0 mm #000 Phillips screws

  3. iPod Touch 5th Generation Lightning Connector Assembly Replacement: 步骤 3 中的图像 1,1
    • Use the flat end of a spudger to pry the speaker up from the rear case.

    • Do not try to remove the speaker, as it is soldered to the Lightning connector assembly.

  4. iPod Touch 5th Generation Lightning Connector Assembly Replacement: 步骤 4 中的图像 1,2 iPod Touch 5th Generation Lightning Connector Assembly Replacement: 步骤 4 中的图像 2,2
    • Grasping the large ribbon cable, gently pull the Lightning connector assembly out of the bottom of the case.

结论

To reassemble your device, follow these instructions in reverse order.

Andrew Optimus Goldheart

于2009年10月17日注册

491,865 声望

创作了411篇指南

团队

iFixit iFixit 的会员

Community

139 名成员

创作了15,812篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 218