跳转到主内容

简介

prerequisite only

配件

没有特定配件。

  1. Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly. There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.
    • Use the flat end of a spudger to flip the front-facing camera out of its socket in the display assembly.

    • There is a small amount of adhesive securing the camera module to its socket, but this should not take very much force. Use the spudger to get in between the black plastic of the camera module and the black plastic of the camera socket and separate them.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Andrew Optimus Goldheart

于2009年10月17日注册

474,261 信誉积分

创作了410篇指南

团队

iFixit iFixit 的会员

Community

137 名成员

创作了16,411篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 324