跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide will help you in identifying the soldering joints locations for the loud speaker on the iPod Touch 4th Generation

  1. I've boxed where the ribbon cable connectors go for the screen and camera. The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.
    • I've boxed where the ribbon cable connectors go for the screen and camera.

    • The soldering joints are marked with a Blue and a Red dot to indicate where to solder the speaker wires.

    • The second picture shows the wires soldered to the logic board.

    • The loud speaker replacement was very tedious job.. anyways Good Luck

结论

To reassemble your device, follow these instructions in reverse order.

3等其他人完成本指南。

Tysl332

于2014年02月11日注册

289 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 7

总计 6,293