/
我的工作台

快速访问设备的指南、配件和论坛

DE
Deutsch
ES
Español
IT
Italiano
PT
Português
TR
Türkçe
JP
日本語
EN
English
FR
Français
NL
Nederlands
RU
Pусский
ZH
中文
KO
한국어
注册
登录
加入世界上最大的维修社区
iPod Touch 1st Generation Case Replacement

iPod Touch 1st Generation Case Replacement

Miroslav Djuric

Miroslav Djuric 和 4 其他贡献者

最后更新于 February 22, 2024

没有估计
困难
仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独使用。

简介

转到步骤 1

This guide shows how to open the iPod Touch 1st Generation's case.

你所需要的

工具

  1. iPod Touch 1st Generation Case Replacement, Case: 步骤 1 中的图像 1，1

    • Opening the case is a tough and potentially dangerous task. A good amount of force is required to wedge the plastic opening tool in between the case seams. The case may be damaged if this step is not done properly. Make sure not to hurt yourself while opening your iPod.

    • Insert the small plastic opening tool into the seam in between plastic display panel and the metal back panel. The angled edge should point towards the metal back panel.

    • Hold the tool in place once it is wedged inside and the two panels are separated.

    翻译

  2. iPod Touch 1st Generation Case Replacement: 步骤 2 中的图像 1，3 iPod Touch 1st Generation Case Replacement: 步骤 2 中的图像 2，3 iPod Touch 1st Generation Case Replacement: 步骤 2 中的图像 3，3

    • There are seven interlocking retaining clips on each side of the iPod. The large plastic opening tool will be used to separate the front panel from the metal back of the iPod.

    • Insert the large opening tool into the right side of the iPod, with the edge of the tool pointing towards the metal back.

    • Gently enlarge the existing crevice by wiggling the large opening tool and moving it to the right.

    • Continue doing so until the right side of the iPod is loose.

    翻译

  4. iPod Touch 1st Generation Case Replacement: 步骤 3 中的图像 1，3 iPod Touch 1st Generation Case Replacement: 步骤 3 中的图像 2，3 iPod Touch 1st Generation Case Replacement: 步骤 3 中的图像 3，3

    • Switch to the other side of the iPod.

    • Follow the same procedure as in the previous step to release the seven clips holding the panels in place.

    • Once the panels are separated on this side, the back panel can be separated from the rest of the iPod.

    翻译

  5. iPod Touch 1st Generation Case Replacement: 步骤 4 中的图像 1，3 iPod Touch 1st Generation Case Replacement: 步骤 4 中的图像 2，3 iPod Touch 1st Generation Case Replacement: 步骤 4 中的图像 3，3

    • Gently lift the rear panel using your fingers.

    • The front and back of the iPod should now be completely separated.

    • The gold antenna (third picture) can easily fall out from its housing. Make sure that the antenna is securely in place before closing the iPod.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 7

过去 30 天： 13

总计 9,587