简介

Use this guide to remove your Shuffle's logic board assembly. The logic board assembly includes the logic board, headphone jack, and battery.

Before beginning, be sure your Shuffle is turned off as shown.
  • Before beginning, be sure your Shuffle is turned off as shown.

添加评论

Use the edge of an iPod opening tool to pry the plastic cover off the headphone jack side of the Shuffle.
  • Use the edge of an iPod opening tool to pry the plastic cover off the headphone jack side of the Shuffle.

  • Remove the plastic cover and set it aside.

添加评论

  • Remove the two Phillips screws from the headphone jack side of the Shuffle.

添加评论

  • Use the edge of an iPod opening tool to remove the steel cover from the headphone jack side of the Shuffle.

添加评论

  • Use the edge of an iPod opening tool to pry the plastic cover off the controls side of the Shuffle.

  • Remove the plastic cover and set it aside.

The On-Off switch here is turn around. Usually it is green when the iPod is turned on.

Nils Kober - 回复

The plastic cover has small clips at either edge in the middle and alongside the button. Put the iPod opening tool in about a third of the way in from either end to avoid breaking the clips.

Daniel Foster - 回复

  • Use a pair of tweezers to remove the hold and shuffle sliders from the Shuffle.

Thanks for this great instruction. Little note: Not important for the function, but contrary to the images the green side of the on/off-slider originally must point in the opposite (inner) direction.

Martin - 回复

  • Remove the two Phillips screws on the controls side of the Shuffle.

添加评论

  • Use the edge of an iPod opening tool to remove the steel plate from the controls side of the Shuffle.

添加评论

  • Use the edge of an iPod opening tool to slightly pry the steel plate on the headphone jack side of the Shuffle away from the lip cut into the outer case.

添加评论

  • Use your iPod opening tool to push the logic board assembly out of the outer case enough to grab the logic board by its edges.

  • Pull the logic board assembly out of the outer case.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

20等其他人完成本指南。

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 10

过去的30天: 57

总计 16,212