跳转到主内容

当前版本的文档还未经巡查,您可以查看最新的已查核版本

你所需要的

  1. , 後面板: 步骤 1 中的图像 1,1
    • 打開 iPod 之前,請確保保持開關處於鎖定位置。 橙色條應該可見,表示開關處於鎖定位置。

  2. : 步骤 2 中的图像 1,3 : 步骤 2 中的图像 2,3 : 步骤 2 中的图像 3,3
    • 將三角撬片盡可能插入 iPod 右側邊緣的塑料前面板和金屬後面板之間的接縫中。

    • 您可能需要前後搖動撥片才能將其滑入更遠。

    • 使用三角撬片撬起塑料前面板並釋放五個固定片(見第三張照片)。

    • 沿著 iPod 的邊緣滑動撬片並繼續撬動以釋放其餘的固定片。

    • 在右側的所有五個標籤都空閒後,外殼應該很容易打開。

  3. : 步骤 3 中的图像 1,1
    • iPod 外殼現已打開,但暫時不要將兩半分開。 仍然有一條橙色的帶狀電纜將耳機插孔連接到邏輯板。

    • 像書本一樣打開外殼,底座連接器邊緣位於頂部,然後將後面板放在 iPod 前半部分旁邊。

  4. : 步骤 4 中的图像 1,1
    • 使用塑料工具或指甲小心地斷開橙色耳機插孔電纜。 在拉的時候請確保拉連接器而不是電線本身。

    • 這種帶狀電纜非常脆弱。 如果要更換電池,可以選擇跳過此步驟,保持耳機插孔與主板連接。 將後殼支撐並用膠帶固定在盒子上以將其固定到位。 工作時要非常小心,不要拉傷易損的耳機插孔電纜。

  5. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 5 中的图像 1,1
    • Grasp the hard drive with one hand and carefully disconnect the orange ribbon cable from the hard drive using your other hand.

    • If the cable doesn't come free easily, it may be helpful to gently wiggle the cable from side to side.

  6. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 6 中的图像 1,1
    • Peel up the black adhesive strip covering the hard drive ribbon cable.

  7. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 7 中的图像 1,1
    • Use the tip of your finger or a spudger to carefully flip up the black connector securing the hard drive cable to the logic board. Note that the black retaining clip flips 90 degrees toward vertical, in the direction of the cable.

  8. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 8 中的图像 1,1
    • Pull the orange hard drive cable directly out of its connector.

终点

8等其他人完成本指南。

iRobot

于09/24/09注册

1 声望

创作了636篇指南

3条评论

My ipod 4th gen does not have the little flap on the cable/logic board. Any ideas how to re-attach?

nick - 回复

Pic 7. whats the second ribbon cable terminal for? I broke ribbon clamping mechanism, is it possible to fix that?

Johny Doc - 回复

I think I broke something, I suppose the clamping mechanism. I mean the black flap is open 90 degrees but when I close it it does not clamp to anything

Ema -

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 21

过去 30 天: 56

总计 20,579