修复你的物品

维修的权力

商店

iPod 2nd Generation Rear Panel Replacement

撰写者： iRobot (和另外2个贡献者)
  • 评论： 2
  • 收藏 2
  • 完成 4

难度

中等

步骤

6

所需时间

建议一个时间??

节

1

标志

0

简介

The shiny rear half of your iPod case.

工具

购买这些工具

配件

没有特定配件。

  1. Before opening your iPod, ensure that the hold switch is in the locked position.

    • Before opening your iPod, ensure that the hold switch is in the locked position.

    编辑

  2. Opening the iPod can be challenging. Don't get discouraged if it takes a few tries before the iPod is opened.

    • Opening the iPod can be challenging. Don't get discouraged if it takes a few tries before the iPod is opened.

    • Insert a plastic iPod opening tool in the seam between the white plastic front and metal back of the iPod. Once you've inserted the tool, run it along the seam to free the five tabs holding the iPod together.

    编辑

  4. Continue to run the opening tool along the side of the case until all five tabs have been released.

    • Continue to run the opening tool along the side of the case until all five tabs have been released.

    编辑

  5. Work around the corner of the iPod and release the two tabs holding the iPod together near the dock connector.

    • Work around the corner of the iPod and release the two tabs holding the iPod together near the dock connector.

    编辑

  6. Free the five tabs holding the iPod together on the other side. You may be able to free the tabs by gently wiggling the front panel of the iPod.

    • Free the five tabs holding the iPod together on the other side. You may be able to free the tabs by gently wiggling the front panel of the iPod.

    编辑

  7. Lift the rear panel away from the iPod, making sure it doesn't catch on the headphone jack.

    • Lift the rear panel away from the iPod, making sure it doesn't catch on the headphone jack.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

作者

与2其他贡献者

iRobot

于2009年09月24日注册

1 信誉积分

创作了648篇指南

徽章: 35

+ 32更多徽章

一条评论

添加一条评论

According to this site: https://www.lifewire.com/history-ipod-cl.... The thickness of the various HD sizes is different.

“4 x 2.4 x 0.78 inches - 5 GB Model

4 x 2.4 x 0.72 inches - 10 GB Model

4 x 2.4 x 0.84 inches - 20 GB Model”

It makes some sense from other information I’ve read, but I don’t find any discussion of a thick and thin version. Is the back for the 20GB model thicker/deeper than the 10GB model? Thanks for another great guide.

Rusty Lingenfelter - 回复

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 9

总计 6,011