跳转到主内容

当前版本的文档还未经巡查,您可以查看最新的已查核版本

你所需要的

  1. , 后盖: 步骤 1 中的图像 1,1
    • 在打开(物理)iPod之前,确保hold开关保持在锁闭位置

  2. : 步骤 2 中的图像 1,1
    • 打开 iPod 可能具有挑战性。打开iPod之前需要几次尝试,请不要气馁。

    • 将塑料 撬棒插入 iPod 白色塑料正面和金属背面之间的接缝中。插入撬棒后,沿着接缝移动它以松开将iPod固定在一起的五个卡扣。

  3. : 步骤 3 中的图像 1,1
    • 持续移动你的撬棒直到打开ipod为止。

  4. : 步骤 4 中的图像 1,1
    • 在 iPod 的一角撬,松开将 iPod 固定在基座连接器附近的两个卡扣。

  5. : 步骤 5 中的图像 1,1
    • 松开另一侧固定 iPod 的五个卡扣。轻轻扭动 iPod 的前面板,也许可以松开卡扣。

  6. : 步骤 6 中的图像 1,1
    • 提起后盖。

    • 确保后盖没有挂上耳机孔。

  7. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 7 中的图像 1,1
    • Peel up the metallic tape attached to the top of the battery.

  8. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 8 中的图像 1,1
    • Lift the battery up from the hard drive and lay it next the the iPod (it is still connected to the logic board).

  9. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 9 中的图像 1,1
    • Carefully disconnect the orange ribbon cable from the hard drive.

    • If the cable doesn't come free easily, it may be helpful to gently wiggle the cable from side to side.

    • Lift the hard drive out of the iPod.

  10. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 10 中的图像 1,1
    • For the following step, you only need to move the locking bar about 2 mm. Pushing too hard or too far will damage the connector.

    • Loosen the connector by pulling the brown locking bar toward the hard drive cable using the tips of your fingers.

  11. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 11 中的图像 1,1
    • Slide the hard drive cable out of its connector.

  12. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 12 中的图像 1,1
    • Lift the blue hard drive mounting bracket out of the iPod.

  13. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 13 中的图像 1,1
    • Carefully disconnect the white battery connector from the logic board. Be sure to pull only on the connector itself and not on the cables.

  14. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 14 中的图像 1,1
    • Like the hard drive connector, for the following step, you only need to move the connector about 2 mm. Pushing too hard or too far will damage the connector.

    • Loosen the touch wheel connector by pulling the brown locking bar toward the side of the iPod using the tips of your fingers.

  15. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 15 中的图像 1,1
    • Remove the 8 T6 Torx screws from the logic board.

  16. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 16 中的图像 1,1
    • Lift the logic board up enough to disconnect the orange touch wheel cable.

    • Lift the logic board out of the iPod.

  17. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 17 中的图像 1,1
    • Note the location of the four white plastic tabs securing the display to the logic board. These tabs must be released before the display can be removed.

  18. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 18 中的图像 1,1
    • Use a spudger or your finger to free the four white plastic tabs indicated in the previous picture.

  19. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 19 中的图像 1,1
    • Use a spudger to carefully disconnect the display ribbon cable from beneath the scroll wheel.

    • Lift the display off the logic board.

  20. 这个步骤还没有翻译 帮忙翻译一下

    : 步骤 20 中的图像 1,1
    • Logic board remains.

终点

2等其他人完成本指南。

iRobot

于09/24/09注册

1 声望

创作了636篇指南

4条评论

I wish all iPods were this easy to fix!

Donald Fournier - 回复

I just replaced a battery and Logic Board in an iPod 2nd Generation. Totally easy; No soldering necessary. The hardest part was waiting for the Logic Board in the mail.

Donald Fournier - 回复

My 2G will not connect to either windows or macos via FW. I have cleaned the connector, checked the logic board for obvious damage, etc. My 1G connects to the same computers just fine. The 2G otherwise works, passes all diagnostics (seems to), and wakes up and charges when I plug it in to the computer. Do I need a new logic board? Otherwise, I am thinking of just manually transferring my music to the drive and living with it.

Rusty Lingenfelter - 回复

Hi,

try to replace the hard drive from your 1G first ans see if this works.

Please let me know.

Thanks,

Georg Balzereit -

添加评论

浏览统计数据:

过去 24 小时: 3

过去 7 天: 14

过去 30 天: 26

总计 9,850