iPhone 8 Speaker Replacement

简介

The iPhone 8 speaker will be easy to get to, at least, you might think. There is one single tri-point screw that prevents most people from getting to their broken speaker. This is the second speaker replacement guild I've done, the first one being for the Motorola One 5G UW.

你所需要的

步骤 1 Speaker

iPhone 8 Speaker Replacement, Speaker: 步骤 1 中的图像 1，1

Sim card tray removal. This step is necessary as seen in Step 7.
Let the battery drain below 25% and power off the device before starting the repair.

编辑

步骤 2

Remove the two bottom screws using the P2 bit in the Pro Tech Tool Kit.

编辑

步骤 3

iPhone 8 Speaker Replacement: 步骤 3 中的图像 3，3

Insert the Jimmy into the right side of the phone. Putting the Jimmy in the middle could crack the glass and/or break the home button. Also, don't put the Jimmy into the left side because you could break the home button cable. Use a small box to prop up the display as shown in picture 3.

编辑

步骤 4

iPhone 8 Speaker Replacement: 步骤 4 中的图像 3，3

Before we disconnect the display, we need to unplug the battery connector. If you don't unplug the battery first, you could damage the back light on the screen.

编辑

步骤 5

Now to remove the display. There are 3 more screws that we need to remove, then we can disconnect the 3 cables.
Remove the display from the housing.

编辑

步骤 6

Now we need to remove this bracket. The screw next to the Taptic Engine is a Y000.

编辑

步骤 7

Disconnect the marked flex cables, then push the sim pin ejector into the frame. Now remove the 3 screws holding the speaker in place. Lift the speaker up and remove it as shown in picture 2.

编辑