跳转到主内容

简介

This guide demonstrates a professional-level repair requiring advanced tools. With this special back glass separator, a broken iPhone 8/8P/X back glass can be removed in just 3 minutes. Residual glue can also be removed easily, which is convenient for subsequent attaching of a new back glass.

视频概述

  1. Wire up the Back Glass Separator. Connect the Back Glass Separator with Air Compressor  via an air pipe. Switch on the Air Compressor. Open the air compressor valve.
    • Wire up the Back Glass Separator. Connect the Back Glass Separator with Air Compressor via an air pipe. Switch on the Air Compressor. Open the air compressor valve.

    • Switch on the Back Glass Separator. Rotate the pressure regulating valve and set the value as 0.4Mpa.

  2. Place iPhone 8 back glass assembly into the corresponding mold. Press ‘Up’. With the temperature rising to 240℃, press ‘Start’. The back glass assembly is clamped tightly by the mold. After 200 seconds of heating, mandril of the machine starts to work.
    • Place iPhone 8 back glass assembly into the corresponding mold. Press ‘Up’. With the temperature rising to 240℃, press ‘Start’. The back glass assembly is clamped tightly by the mold.

    • After 200 seconds of heating, mandril of the machine starts to work.

  3. Remove the back glass after 18 seconds. Remove glue residue on the back glass thoroughly.
    • Remove the back glass after 18 seconds. Remove glue residue on the back glass thoroughly.

    • iPhone 8 back glass separating has been completed successfully.

    • Attach a new back glass to the midframe in the end.

终点

6等其他人完成本指南。

Phryne

于2019年11月17日注册

16,185 信誉积分

创作了18篇指南

添加评论

浏览统计数据:

过去的24小时: 5

过去的7天: 239

过去的30天: 1,053

总计 18,586