修复你的物品

维修的权力

商店

iPhone 7 Battery Disconnection

撰写者： Evan Noronha (和另外6个贡献者)
  • 评论： 34
  • 收藏 3
  • 完成 2

难度

中等

步骤

3

所需时间

建议一个时间??

节

1

标志

1

Prerequisite Only

仅作为前提条件

请注意，本指南只是其他指南的前提条件。

简介

Prerequisite guide for disconnecting the battery connector.

  1. Remove four tri-point Y000 screws securing the lower connector bracket, of the following lengths:
    在这个步骤中使用的工具：
    Magnetic Project Mat
    $19.99

    • Remove four tri-point Y000 screws securing the lower connector bracket, of the following lengths:

    • Three 1.2 mm screws

    • One 2.4 mm screw

    • Throughout this repair, keep track of each screw and make sure it goes back exactly where it came from to avoid damaging your iPhone.

    编辑

  3. Remove the lower connector bracket.

    • Remove the lower connector bracket.

    编辑

  4. Use the point of a spudger to lift the battery connector out of its socket on the logic board. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone. Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

    • Use the point of a spudger to lift the battery connector out of its socket on the logic board.

    • Bend the connector cable up slightly to prevent it from making contact with the socket and providing power to the phone.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与6其他贡献者

Evan Noronha

于2015年02月05日注册

202,223 信誉积分

创作了178篇指南

徽章: 49

+ 46更多徽章

团队

iFixit iFixit 的会员

Community

135 名成员

创作了13,904篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 4

总计 736