跳转到主内容

配件

没有特定配件。

  1. Remove three screws securing the vibrator and vibrator bracket to the rear case: One 2.3 mm Phillips screw
    • Remove three screws securing the vibrator and vibrator bracket to the rear case:

    • One 2.3 mm Phillips screw

    • One 1.7 mm Phillips screw

    • One 1.6 mm Phillips screw securing the vibrator to the top inside of the rear case.

  2. Remove the vibrator and vibrator bracket from the rear case.
    • Remove the vibrator and vibrator bracket from the rear case.

  3. Remove the following screws securing the volume button and ringer switch brackets to the side of the rear case:
    • Remove the following screws securing the volume button and ringer switch brackets to the side of the rear case:

    • One 1.5 mm Phillips screw

    • Two 1.8 mm Phillips screws

  4. Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case. Remove the ringer switch.
    • Use the tip of a spudger to pry the ringer switch bracket from the side of the rear case.

    • Remove the ringer switch.

  5. Use a spudger to pry the volume button bracket from the side of the rear case. Remove the volume buttons.
    • Use a spudger to pry the volume button bracket from the side of the rear case.

    • Remove the volume buttons.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Andrew Optimus Goldheart

于2009年10月17日注册

429,532 信誉积分

创作了411篇指南

团队

iFixit iFixit 的会员

Community

108 名成员

创作了9,541篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 466