修复你的物品 社区 商店

iPhone 5 Display Assembly Replacement

已存档的指南
本指南只作为历史记录保留。请使用指南的最新版本来进行维修。

简介

This repair is for an Apple iPhone 5. This process works on all iPhone 5 carriers and colors.

The display assembly includes the home button assembly, front camera assembly, earpiece speaker, and the LCD shield plate.

你所需要的

  1. iPhone 5 Display Assembly Replacement, Safety Precautions and Replacement Preparations: 步骤 1 中的图像 1，3 iPhone 5 Display Assembly Replacement, Safety Precautions and Replacement Preparations: 步骤 1 中的图像 2，3 iPhone 5 Display Assembly Replacement, Safety Precautions and Replacement Preparations: 步骤 1 中的图像 3，3

    • If your display is cracked, keep your eyes and skin protected. Wear Safety glasses to protect your eyes and wear latex or nitrile gloves to protect hands from shrapnel (Make sure you are not allergic to the material of the gloves.).

    • Laying clear packing tape over the broken glass until the whole screen is covered. Doing this can prevent any injuries or glass from being scattered on the table.

    编辑

  2. iPhone 5 Display Assembly Replacement, Display Assembly Screws Removal: 步骤 2 中的图像 1，2 iPhone 5 Display Assembly Replacement, Display Assembly Screws Removal: 步骤 2 中的图像 2，2

    • Before removing the Display assembly, be sure to power off your phone. This can prevent power shortages.

    • Take the 5-Point Pentalobe screwdriver to remove two 3.6 mm Pentalobe screws next to the Lighting Connector (Charging Port).

    编辑

  3. iPhone 5 Display Assembly Replacement, Display Assembly Removal Part I: 步骤 3 中的图像 1，1

    • An X-acto blade will be used for this step. Take immense caution when using the blade. Always cut away from you.

    • Extend the blade 2mm from closed position.

    • Place blade between the display assembly and the phone housing.

    • Push down between the display assembly and the phone housing until you see a gap. Once you see the gap, pry up using the blade to keep the gap.

    编辑

  4. iPhone 5 Display Assembly Replacement, Display Assembly Removal Part II: 步骤 4 中的图像 1，1

    • Now that there is a fixed gap, use your plastic pry tool to pry around the display assembly, to separate the screen from the phone.

    • If you hear clicks, that means the display bezel is un-clipping from the phone, which is good.

    编辑

  6. iPhone 5 Display Assembly Replacement, Display Assembly Removal Part III: 步骤 5 中的图像 1，1

    • Gently lift the display assembly away from the phone, and make a 90 degree angle with respect to the horizontal.

    编辑

  7. iPhone 5 Display Assembly Replacement, Connector Protective Plate Removal: 步骤 6 中的图像 1，1

    • Locate the Connector Protective plate, it is at the top right of the phone. Along the side of the power button.

    • Take your #000 Phillips head screwdriver to unscrew three Phillip screws holding the Connector Protective plate to the logic board.

    • Once all the Phillips screws and removed, remove the Connector Protective Plate from the phone.

    编辑

  8. iPhone 5 Display Assembly Replacement, Disconnecting Display Assembly Cables: 步骤 7 中的图像 1，2 iPhone 5 Display Assembly Replacement, Disconnecting Display Assembly Cables: 步骤 7 中的图像 2，2

    • Locate three cables that link from the back of the display assembly to the logic board.

    • Slowly, remove each cable with pliers.

    编辑

  9. iPhone 5 Display Assembly Replacement, Display Assembly Full Removal: 步骤 8 中的图像 1，1

    • Now that the three cables are disconnected, remove the old Display Assembly and store it safely.

    编辑

  10. iPhone 5 Display Assembly Replacement, Clean the Internals: 步骤 9 中的图像 1，1

    • Using compressed air specifically for electronics, blow away any dust and trash from the phone.

    编辑

  11. iPhone 5 Display Assembly Replacement, Reverse: 步骤 10 中的图像 1，1

    • Perform everything in reverse with the new Display Assembly.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

13等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 2,775