跳转到主内容

简介

If you have a problem with charging, connecting with iTunes, don't hear you in a phone call, connecting with WiFi, ringing.

In this video manual we will show you how to change / replace the iPhone 4S USB Charging Port Dock Connector Flex Cable with Mic and inner Ringer / Loud Speaker & WiFi Antenna flex.


Please SUBSCRIBE to my channel ツ

视频概述

  1. If present, remove the small strip of tape covering one of the dock connector screws.
    • If present, remove the small strip of tape covering one of the dock connector screws.

  2. Use a plastic opening tool to flip up the retaining flap on the home button ribbon cable ZIF socket. Be sure you are prying up on the hinged retaining flap, not the socket itself.
    • Use a plastic opening tool to flip up the retaining flap on the home button ribbon cable ZIF socket.

    • Be sure you are prying up on the hinged retaining flap, not the socket itself.

  3. Use a pair of tweezers to pull the home button ribbon cable out of its socket.
    • Use a pair of tweezers to pull the home button ribbon cable out of its socket.

    • There are tiny components on the back side of the ribbon, so be careful not to damage them upon ribbon removal.

  4. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  5. Carefully pull the rubber microphone holder out of its tube in the bottom edge of the iPhone.
    • Carefully pull the rubber microphone holder out of its tube in the bottom edge of the iPhone.

  6. Remove the two 1.3 mm Phillips screws securing the dock connector to the case of the iPhone.
    • Remove the two 1.3 mm Phillips screws securing the dock connector to the case of the iPhone.

  7. Remove the tiny rubber spacer near the dock connector.
    • Remove the tiny rubber spacer near the dock connector.

  8. Use the edge of a plastic opening tool to peel the dock connector and its cable off the black plastic case of the iPhone. If you are replacing the dock connector with a new part, make sure to transfer the rubber casing around the microphone. You can do this using a spudger.
    • Use the edge of a plastic opening tool to peel the dock connector and its cable off the black plastic case of the iPhone.

    • If you are replacing the dock connector with a new part, make sure to transfer the rubber casing around the microphone. You can do this using a spudger.

  9. Pry the dock connector away from its opening at the bottom of the iPhone. Remove the dock connector.
    • Pry the dock connector away from its opening at the bottom of the iPhone.

    • Remove the dock connector.

  10. Speaker enclosure remains.
    • Speaker enclosure remains.

结论

To reassemble your device, follow these instructions in reverse order.

19等其他人完成本指南。

ZFix

于2013年12月09日注册

165,734 信誉积分

创作了305篇指南

团队

Master Techs Master Techs 的会员

Community

287 名成员

创作了811篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 10,578