跳转到主内容

简介

Apple has substituted the two bottom Phillips screws near the dock connector with 5-point "Pentalobular" screws.

This guide will illustrate how to replace the Pentalobe screws with good ol' regular Phillips screws.

工具

没有特定工具。

  1. Before we proceed, let's make sure you have the correct tools for the job.
    • Before we proceed, let's make sure you have the correct tools for the job.

    • iFixit's iPhone 4/4S Liberation Kit includes:

    • One 5-Point Pentalobe screwdriver

    • One #000 Phillips screwdriver

    • Two 3.6 mm "Liberation" Phillips screws

    • Are you ready to break the shackles of hardware oppression and liberate your iPhone? Let's rock!

  2. Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector. Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.
    • Use the Pentalobe screwdriver to remove the two 3.6 mm Pentalobe screws near the dock connector.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card. Both the Phillips and Pentalobe screws are really small. How small? See for yourself (highlighted in the second picture).
    • Peel and remove the two 3.6 mm Phillips screws from the iPhone Liberation Card.

    • Both the Phillips and Pentalobe screws are really small. How small? See for yourself (highlighted in the second picture).

  5. Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.
    • Insert the two 3.6 mm Phillips screws into the screw holes using the provided #000 Phillips screwdriver.

    • Huzzah! Your iPhone is now liberated from those pesky "Pentalobular" screws.

结论

To reassemble your device, follow these instructions in reverse order.

46等其他人完成本指南。

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 16

总计 32,345