跳转到主内容

修复你的物品

维修的权力

商店

简介

Use this guide to remove or replace the two screws securing the iPhone 12 Pro display panel. These are the only screws on the exterior of the iPhone. They use a five-point design that is unique to Apple, requiring a specialty P2 pentalobe driver for removal.

配件

没有特定配件。

  1. Caution: Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.
    • Caution: Before you begin, discharge your iPhone battery below 25%. A charged lithium-ion battery can catch fire and/or explode if accidentally punctured.

    • Power off your iPhone before beginning disassembly.

    • Remove the two 6.75 mm long pentalobe P2 screws at the bottom edge of the iPhone.

    • Opening the iPhone's display will compromise its waterproof seals. Have replacement seals ready before you proceed past this step, or take care to avoid liquid exposure if you reassemble your iPhone without replacing the seals.

结论

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

于2015年04月11日注册

118,875 信誉积分

创作了353篇指南

团队

iFixit iFixit 的会员

Community

135 名成员

创作了13,913篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 11

过去的30天: 23

总计 21