跳转到主内容

修复你的物品

维修的权力

商店

简介

Prerequisite guide for disconnecting the battery before performing any repair.

配件

没有特定配件。

  1. To avoid stressing any cables, hold the display assembly perpendicular to the body of the iPad until it is disconnected.
    • To avoid stressing any cables, hold the display assembly perpendicular to the body of the iPad until it is disconnected.

    • Remove the four 1.2 mm Phillips screws over the battery/display connector bracket.

  2. Remove the battery/display cable bracket.
    • Remove the battery/display cable bracket.

  3. When disconnecting any press connectors from the logic board, be sure to lift the connector straight up to avoid ripping the socket off the board. Use the flat tip of a spudger to disconnect the battery connector from its socket on the logic board.
    • When disconnecting any press connectors from the logic board, be sure to lift the connector straight up to avoid ripping the socket off the board.

    • Use the flat tip of a spudger to disconnect the battery connector from its socket on the logic board.

    • Bend the battery connector ribbon cable up slightly to prevent it from making contact and powering on the iPad.

结论

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

于2015年02月05日注册

205,330 信誉积分

创作了178篇指南

团队

iFixit iFixit 的会员

Community

133 名成员

创作了15,587篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 3

总计 134