跳转到主内容

修复你的物品

维修的权力

商店

简介

Prereq for removing logic board with no battery.

  1. Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket. Use tweezers to peel the tape up the rest of the way, and remove it from the bracket. Use tweezers to peel the tape up the rest of the way, and remove it from the bracket.
    • Use the tip of a spudger to start peeling up the right side of the black tape covering the small metal bracket.

    • Use tweezers to peel the tape up the rest of the way, and remove it from the bracket.

  2. Use a plastic opening tool to push the bracket slightly to the left. Use a plastic opening tool to push the bracket slightly to the left.
    • Use a plastic opening tool to push the bracket slightly to the left.

  3. Use a spudger tip to lift up the lower side of the bracket. Use a spudger tip to lift up the lower side of the bracket.
    • Use a spudger tip to lift up the lower side of the bracket.

  4. Remove the bracket with tweezers. During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.
    • Remove the bracket with tweezers.

    • During reassembly, hook the top edge of the plate in place first, then lower the bottom into its slots.

结论

To reassemble your device, follow these instructions in reverse order.

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 95