修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

iPad 4 Wi-Fi Headphone Jack Assembly Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

Internal prereq.

你所需要的

  1. iPad 4 Wi-Fi Headphone Jack Assembly Replacement, Headphone Jack Assembly: 步骤 1 中的图像 1，1

    • Carefully move, but do not remove the front-facing camera ribbon cable aside with the flat edge of a spudger.

    翻译

  2. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 2 中的图像 1，2 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 2 中的图像 2，2

    • Peel back and remove the adhesive tape covering the headphone jack assembly.

    翻译

  3. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 3 中的图像 1，1

    • Using the tip of the spudger, flip up the retaining flap on the microphone cable ZIF connector.

    翻译

  5. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 4 中的图像 1，2 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 4 中的图像 2，2

    • Insert the tip of the spudger underneath the microphone ribbon cable and carefully push it out from its socket on the ZIF connector.

    • Use the flat edge of a spudger to move the microphone ribbon cable aside.

    翻译

  6. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 5 中的图像 1，1

    • Flip up the retaining flap securing the volume/power button ribbon cable connector to the headphone jack assembly board.

    翻译

  7. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 6 中的图像 1，2 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 6 中的图像 2，2

    • Push the volume button ribbon cable from its ZIF connector.

    • Gently bend the volume button ribbon cable upwards to move it aside.

    翻译

  8. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 7 中的图像 1，3 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 7 中的图像 2，3 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 7 中的图像 3，3

    • Remove the following screws from the headphone jack assembly:

    • Five 2.6 mm Phillips #0

    • Two 2.2 mm Wide Head Phillips #00

    • Two 2.6 mm Phillips #00

    • These screws are angled into the aluminum frame. Be sure to hold the screwdriver so that the screwdriver is in line with the screw, to avoid stripping the screw.

    翻译

  9. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 8 中的图像 1，1

    • Holding onto the ribbon cable of the headphone jack assembly, carefully pull the assembly upwards towards the top of the device.

    翻译

  10. iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 9 中的图像 1，2 iPad 4 Wi-Fi Headphone Jack Assembly Replacement: 步骤 9 中的图像 2，2

    • Grasping the headphone jack assembly with one hand, pull the assembly from the iPad, minding any cables that may get caught.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 38