iPad 4 Wi-Fi Front Panel Assembly Replacement - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

简介

Preq for removing the front panel. Specific to the iPad 4, also involves moving the LCD over.

你所需要的

步骤 1 Front Panel Assembly

iPad 4 Wi-Fi Front Panel Assembly Replacement, Front Panel Assembly: 步骤 1 中的图像 1，2

iPad 4 Wi-Fi Front Panel Assembly Replacement, Front Panel Assembly: 步骤 1 中的图像 2，2

Remove the four 2 mm Phillips #00 screws securing the LCD to the aluminum frame.
The bottom left screw is obscured by the home button ribbon cable connector. Carefully move the home button ribbon cable aside to remove the bottom left screw.

步骤 2

iPad 4 Wi-Fi Front Panel Assembly Replacement: 步骤 2 中的图像 1，3

iPad 4 Wi-Fi Front Panel Assembly Replacement: 步骤 2 中的图像 2，3

iPad 4 Wi-Fi Front Panel Assembly Replacement: 步骤 2 中的图像 3，3

Using a plastic opening tool or a spudger, lift the right edge of the LCD out of the iPad.
Rotate the LCD along its left edge and lay it down on top of the front glass panel.
Be careful as you move the LCD. The ribbon cable is fragile and may break if it is flexed too much.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Walter Galan

694,573 声望

创作了1,203篇指南

+ 51更多徽章

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 108