修复你的物品 社区 商店

iPad 3 Wi-Fi Power & Volume Button Assembly Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独使用。

简介

Internal Prereq.

你所需要的

  1. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement, Power & Volume Button Assembly: 步骤 1 中的图像 1，1

    • Remove the following screws securing the power & volume button cable to the aluminum frame:

    • Two 5.5mm Phillips #0

    • One 2.6 mm Phillips #0

    • Two 2.6 mm Phillips #0

    • These screws are angled into the aluminum frame. Be sure to always hold the screwdriver in line with the screw.

    翻译

  2. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 2 中的图像 1，1

    • Remove the piece of plastic covering the volume buttons.

    翻译

  3. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 3 中的图像 1，1

    • Remove the single 2.6 mm Phillips #00 screw holding the volume button frame to the aluminum frame.

    • This screw is angled into the aluminum frame. Be sure to always hold the screwdriver in line with the screw.

    翻译

  5. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 4 中的图像 1，2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 4 中的图像 2，2

    • Wedge the edge of a plastic opening tool underneath the sleep/wake sensor, being careful to not damage the fragile cable.

    • Move the plastic opening tool around the sensor, releasing the adhesive.

    翻译

  6. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 5 中的图像 1，2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 5 中的图像 2，2

    • Continue sliding the plastic opening tool underneath the power & volume cables, releasing the adhesive.

    翻译

  7. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 6 中的图像 1，2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 6 中的图像 2，2

    • Using the tip of a spudger, release the adhesive underneath the volume button branch of the ribbon cable.

    翻译

  8. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 7 中的图像 1，2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 7 中的图像 2，2

    • Continue sliding the tip of the spudger toward the top of the iPad, releasing the adhesive.

    翻译

  9. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 8 中的图像 1，3 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 8 中的图像 2，3 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 8 中的图像 3，3

    • With the tip of the spudger still underneath the ribbon cable, gently lift the power button out of its socket in the aluminum frame.

    翻译

  10. iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 9 中的图像 1，2 iPad 3 Wi-Fi Power & Volume Button Assembly Replacement: 步骤 9 中的图像 2，2

    • Holding the power & volume button cable with with both hands, carefully pull the volume buttons and lock switch from their sockets in the aluminum frame.

    • Lift and remove the power & volume button cable out of the rear aluminum case.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 5

总计 125