跳转到主内容

iPad 3 4G Antenna Connectors Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. iPad 3 4G Antenna Connectors Replacement, Antenna Connectors: 步骤 1 中的图像 1,1
    • Remove the seven screws securing the logic board to the rear aluminum panel.

    • Six 2.1mm Phillips #00

    • One 2.5mm Phillips #00

  2. iPad 3 4G Antenna Connectors Replacement: 步骤 2 中的图像 1,1
    • Flip the logic board over, minding any cables that may get caught.

    • Using the tip of a spudger, remove the three antenna connectors from their sockets on the logic board.

    I know the middle connector goes to the left antenna. Where do the other two go?

    Anticept - 回复

    Looking this pic, the left cable goes to the right antena and the right one to the middle antena (or whatever is there) under the front camera

    Maratech - 回复

    Right antenna, left antenna, GPS

    Malcolm Stevens - 回复

结论

To reassemble your device, follow these instructions in reverse order.

Brett Hartt

于04/12/10注册

127,897 声望

创作了143篇指南

团队

iFixit iFixit 的会员

Staff

135 名成员

创作了16,817篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 65