跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

你所需要的

  1. iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement, Optical Drive: 步骤 1 中的图像 1,1
    • Remove the four T10 Torx screws securing the optical drive to the outer case.

  2. iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement: 步骤 2 中的图像 1,1
    • Pull the optical drive thermal sensor connector straight away from its socket on the logic board.

  3. iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement: 步骤 3 中的图像 1,2 iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement: 步骤 3 中的图像 2,2
    • Insert a spudger between the optical drive connector and the optical drive.

    • Twist the spudger to slightly separate the optical drive connector from the optical drive, then use your fingers to pull the connector away from the drive.

  4. iMac Intel 27" EMC 2309 and 2374 Optical Drive Replacement: 步骤 4 中的图像 1,1
    • Lift the left edge of the optical drive slightly and pull it away from the right side of the outer case.

    • During reassembly, note that there are two holes in the optical drive face plate into which two stubby plastic posts must engage for proper positioning.

结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 0

总计 2,139