简介

拿走检修门来更换内存

配件

无需配件。

松开固定iMac底部的三个十字螺丝。
  • 松开固定iMac底部的三个十字螺丝。

  • 这些螺丝将保留在检修门上。

  • 从你的iMac拿开检修门

  • 重新组装时,将检修门松开,并将其与iMac外壳上的检修门口对齐,然后再拧紧螺钉。

I am going to put a very important comment here. Before you start this process listen to the fans on your iMac do any of them sound obviously loud (think about how quiet your iMac used to sound as a reference) If you notice one or more of them sounding substantially loud compared to the others consider locating a replacement fan prior starting this process. After all if you are already “in the neighborhood” it is a shame to do all this work only to have to disassemble your imac a couple weeks later because you realize the fan is failing. I speak from my own personal learning experience of having to disassembly my iMac 3 weeks later because the HDD was failing and apparently the moving the fan around was just enough to push it to start really under performing.

Wizbang FL - 回复

I’m not sure why it is necessary to remove the RAM. As far as I can tell, it can remain in place during this procedure.

gordonhamachi - 回复

结论

重组你的设备只需要完成相反的步骤

29等其他人完成本指南。

特别感谢这些译者︰

100%

沢野大仙正在帮助我们修复这个世界! 想要作出贡献?
开始翻译 ›

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 8

过去的30天: 54

总计 44,143