简介

Remove the glass panel to gain access to your iMac's internals.

配件

无需配件。

    • The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.

    • Stick two suction cups to opposing corners of the glass panel.

    • To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

    • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent such as Windex.

  1. Gently pull the glass panel straight up off the iMac.
    • Gently pull the glass panel straight up off the iMac.

    • The glass panel has several positioning pins around its perimeter. To avoid shearing these pins off the glass panel, be sure to only pull straight up during removal.

    • Be meticulous about cleaning the LCD and the inside face of the glass panel before reinstallation, as any fingerprints or dust trapped inside will be annoyingly visible when the display is on.

结论

To reassemble your device, follow these instructions in reverse order.

25等其他人完成本指南。

Brittany McCrigler

于2012年03月05日注册

80,468 信誉积分

创作了132篇指南

团队

iFixit iFixit 的会员

Community

108 名成员

创作了7,542篇指南

浏览统计数据:

过去的24小时: 7

过去的7天: 39

过去的30天: 117

总计 14,868