跳转到主内容

简介

Prerequisite only guide for removing the hard drive assembly from a 21.5" Retina 4K Late 2015 iMac.

配件

没有特定配件。

  1. Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet. The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.
    • Lift the hard drive from the edge nearest the logic board and pull it slightly out of its recess.

    • The hard drive is still attached by its SATA cable; do not attempt to fully remove it from the iMac yet.

  2. Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive. Remove the hard drive assembly from the iMac. Remove the hard drive assembly from the iMac.
    • Use a spudger to disconnect the single SATA cable by prying it gently away from the hard drive.

    • Remove the hard drive assembly from the iMac.

结论

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

于2015年02月05日注册

208,711 信誉积分

创作了178篇指南

团队

iFixit iFixit 的会员

Community

137 名成员

创作了16,689篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 7

总计 273