跳转到主内容

简介

Prerequisite only.

配件

没有特定配件。

  1. Gently pull the fan cable connector straight out of its socket on the logic board. Gently pull the fan cable connector straight out of its socket on the logic board.
    • Gently pull the fan cable connector straight out of its socket on the logic board.

  2. Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.
    • Remove the three 10 mm T10 Torx screws securing the fan to the rear enclosure.

    • The uppermost screw has a rubber standoff adhered to its head to support the display—leave this in place.

  3. Remove the fan from the iMac. Remove the fan from the iMac.
    • Remove the fan from the iMac.

结论

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

于2015年02月05日注册

179,595 信誉积分

创作了177篇指南

团队

iFixit iFixit 的会员

Community

107 名成员

创作了9,591篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 48