跳转到主内容

修复你的物品

维修的权力

商店

简介

Prereq only for removing the AirPort/Bluetooth card from the logic board.

配件

没有特定配件。

  1. Remove the two 3.3 mm T5 Torx screws securing the AirPort/Bluetooth card to the logic board.
    • Remove the two 3.3 mm T5 Torx screws securing the AirPort/Bluetooth card to the logic board.

  2. Slightly lift the AirPort/Bluetooth card and pull it straight out its socket. Do not use excessive force to pull the end of the AirPort/Bluetooth card away from its socket on the logic board. Doing so may damage the socket. When reinstalling the card, be sure it is properly seated before reinstalling the retaining screws.
    • Slightly lift the AirPort/Bluetooth card and pull it straight out its socket.

    • Do not use excessive force to pull the end of the AirPort/Bluetooth card away from its socket on the logic board. Doing so may damage the socket.

    • When reinstalling the card, be sure it is properly seated before reinstalling the retaining screws.

    • If the AirPort/Bluetooth card is properly seated, its screw holes should align with those on the logic board.

结论

To reassemble your device, follow these instructions in reverse order.

Evan Noronha

于2015年02月05日注册

198,062 信誉积分

创作了178篇指南

团队

iFixit iFixit 的会员

Community

129 名成员

创作了12,929篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 79