跳转到主内容

简介

Prereq to remove fan after hard drive brackets.

配件

没有特定配件。

  1. Gently pull the fan cable connector straight away from its socket on the logic board. Gently pull the fan cable connector straight away from its socket on the logic board.
    • Gently pull the fan cable connector straight away from its socket on the logic board.

  2. Remove the three 12.3 mm T10 shoulder screws securing the fan to the rear enclosure.
    • Remove the three 12.3 mm T10 shoulder screws securing the fan to the rear enclosure.

  3. Remove the fan from the iMac. Remove the fan from the iMac.
    • Remove the fan from the iMac.

结论

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

于2012年10月18日注册

444,213 信誉积分

创作了547篇指南

团队

iFixit iFixit 的会员

Community

139 名成员

创作了15,643篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 47