简介

Use this guide to remove your access door.

配件

无需配件。

Unplug your iMac's AC cord along with any peripheral devices.
  • Unplug your iMac's AC cord along with any peripheral devices.

  • Lay your iMac face-down on a soft, clean surface as shown.

  • Be sure there isn't any dirt or debris on your work surface, as it may scratch the glass panel on the front of your iMac. We recommend placing a towel between the iMac and the work surface.

  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • All three screws will remain captive in the access door.

  • Remove the access door.

Before beginning unplug your iMac.

Henry Barnett - 回复

The screws are not phillips #1 as implied above. My phillips#2 bit fit.

John McWilliams - 回复

Yes phillips #2 is the correct Bit

Heath - 回复

结论

To reassemble your device, follow these instructions in reverse order.

5等其他人完成本指南。

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 35

总计 4,078