修复你的物品 社区 商店

iMac Intel 21.5" EMC 2308 RAM Replacement

简介

Upgrade your RAM for an instant increase in speed.

你所需要的

  1. iMac Intel 21.5" EMC 2308 RAM Replacement, Access Door: 步骤 1 中的图像 1，2 iMac Intel 21.5" EMC 2308 RAM Replacement, Access Door: 步骤 1 中的图像 2，2

    • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

    • These screws will remain captive in the access door.

    • Remove the access door from your iMac.

    • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

    编辑

    In order for the logic board to come out cleanly, one should remove the RAM at the end of this step.

    kevmacmills - 回复

    Definitely! The author should make this as a step in the description (because not everyone reads Comments)

    finnik2d - 回复

    Just did this procedure and the RAM must absolutely come out for the logic board to come free later.

    matt - 回复

  3. iMac Intel 21.5" EMC 2308 RAM Replacement, RAM: 步骤 2 中的图像 1，1

    • Use the sharp tip of a spudger to pull the black plastic RAM tabs out of the memory bay.

    编辑

  4. iMac Intel 21.5" EMC 2308 RAM Replacement: 步骤 3 中的图像 1，2 iMac Intel 21.5" EMC 2308 RAM Replacement: 步骤 3 中的图像 2，2

    • Pull the black plastic RAM tab away from your iMac to eject the RAM chip.

    • Grab the RAM chip by its edges and pull it straight out of its slot.

    • If two RAM chips are installed, repeat this process for the other chip.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

111等其他人完成本指南。

一条评论

There needs to be a little bit of important discucssion about getting the new RAM properly seated into the slots. Otherwise, great instructions!

Mary - 回复

添加评论

浏览统计数据:

过去 24 小时： 3

过去 7 天： 15

过去 30 天： 101

总计 88,759