简介

Remove the access door to replace RAM chips.

配件

无需配件。

Loosen the three Phillips screws securing the access door to the bottom edge of your iMac. These screws will remain captive in the access door.
  • Loosen the three Phillips screws securing the access door to the bottom edge of your iMac.

  • These screws will remain captive in the access door.

  • Remove the access door from your iMac.

  • During reassembly, fasten the access door loosely and align it with the pocket cut into the outer case of the iMac before fully tightening the screws.

In order for the logic board to come out cleanly, one should remove the RAM at the end of this step.

kevmacmills - 回复

Definitely! The author should make this as a step in the description (because not everyone reads Comments)

finnik2d - 回复

Just did this procedure and the RAM must absolutely come out for the logic board to come free later.

matt - 回复

Mac RAM 套件
加速你的Mac。充分利用它的内存。
Mac RAM 套件
从Mac中清理出更多内存。
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 9

过去的30天: 35

总计 7,811